Cable Specification
Cable specification codes control several aspects of
PlantWise.
SPECIFICATION | Voltage | Glands | Description | Outside-Diameter | Area | Weight | Cost- Factor | PipewayLevel | Cad- Level | SpacingIndex | No_Cond | Cond-Size |
---|---|---|---|---|---|---|---|---|---|---|---|---|
"CA314" | "600V" | "71A" | "MC Control Cable" | 0.6 | 0.28 | 0.15 | 0.51 | :UTILITY | "cable" | 4 | 3 | "2 AWG" |
"CAU14" | "600V" | "71C2" | "MC Control Cable" | 1.35 | 1.43 | 0.96 | 5.4 | :UTILITY | "cable" | 4 | 3 | "350 KCMIL" |
"PA34X" | "15kV" | "71E" | "MC Shielded Power Cable" | 2.05 | 3.3 | 2.072 | 6.0 | :UTILITY | "cable" | 6 | 3 | "500 KCMIL" |
"PC32X" | "600V" | "71C" | "MC Power Cable" | 1.17 | 1.08 | 1.06 | 3.08 | :UTILITY | "cable" | 4 | 3 | "4/0 AWG" |
- OUTSIDE-DIAMETER – is the routed diameter of the cable.
- PIPEWAY-LEVEL
(:UTILITY, :PROCESS, or another user chosen
level name) – determines the preferred routing levels for cables of the
specification.
By default, the AutoRouter places UTILITY cables first on the second level of a multi-level pipeway while PROCESS cables prefer the first level. You can change level setting in the Pipeway Builder (see Editing Level Names).
- CAD-LEVEL – designates what level cables of each specification should draw to.